Wall Units
The MSZ Series wall mounted indoor units offer functional design, quiet operations and comfort. With multiple operating modes, multiple fan speeds, and multiple airflow directions, these units fits the needs of nearly any room.
| Model | Clg MBH | SEER | Htg MBH | HSPF | I-See | Hyper-Heat |
|---|---|---|---|---|---|---|
| MSZ-GL06 | 6.0 | 24.6 | 7.2 | 1.8 | No | Yes |
| MSZ-GL09 | 9.0 | 24.6 | 10.9 | 12.8 | No | Yes |
| MSZ-GL12 | 12.0 | 23.1 | 14.4 | 12.5 | No | Yes |
| MSZ-GL15 | 14.0 | 21.6 | 18.0 | 11.7 | No | Yes |
| MSZ-GL18 | 18.0 | 20.5 | 21.6 | 11.2 | No | Yes |
| MSZ-GL24 | 22.4 | 20.5 | 27.6 | 10.0 | No | Yes |
| MSZ-FH06 | 6.0 | 33.1 | 8.7 | 13.5 | Yes | Yes |
| MSZ-FH09 | 9.0 | 30.5 | 10.9 | 13.5 | Yes | Yes |
| MSZ-FH12 | 12.0 | 26.1 | 13.6 | 12.5 | Yes | Yes |
| MSZ-FH15 | 15.0 | 22.0 | 18.0 | 12.0 | Yes | Yes |
| MSZ-FH18 | 17.2 | 21.0 | 20.3 | 12.0 | Yes | Yes |
- Advanced Filtration System Two advanced filters to clean and deodorize the circulated air. The deodorizing filter absorbs any offending smells, while the second is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.
- I-See Sensor 3D (FH Units Only) Monitors its zone for fluctuations in temperature. If it detects an underserved area, the unit will temporarily direct airflow to that area. It also enters energy saving mode if no human heat signatures are detected.
- Hot Start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
- Vane Control Two vane control options, standard and wide. Auto mode selects the best vane position based on operating mode while swing mode cycles through each vane position.
Floor Units
| Model | Clg MBH | SEER | Htg MBH | HSPF | I-See | Hyper-Heat |
|---|---|---|---|---|---|---|
| MFZ-KJ09NA | 9.0 | 28.2 | 11.0 | 13.0 | No | Yes |
| MFZ-KJ12NA | 12.0 | 25.5 | 13.0 | 13.6 | No | Yes |
| MFZ-KJ15NA | 15.0 | 21.8 | 18.0 | 11.6 | No | Yes |
| MFZ-KJ18NA | 17.0 | 21.0 | 21.0 | 11.3 | No | Yes |
- *Multiple Vane Control Options Auto mode selects the best vane position based on operating mode, and the swing modes cycle through all positions for maximum coverage.
kumo cloud® SmartPhone App
Whether you're out for the day or the month, whether you want to cool down or warm up, kumo cloud gives you control no matter where you are.
- Anytime, anywhere control: kumo cloud gives you control from any smartphone, tablet, or web browser.
- Whole system control: Through the user interface on a smartphone or tablet, a homeowner can control an entire Diamond Comfort System®.
- Trouble shooting: f your system isn't working properly, you can determine basic problems through the kumo cloud error alerts.
- Advanced programming: kumo cloud now features advanced logic to perform Auto Changeover. The system now alternates between heating and cooling using a patent-pending algorithm to deliver personalized comfort. Using kumo station™, additional programming and control of supplemental heat sources, humidification, dehumidification and ventilation can also be performed.
- Filter check: You never have to manually check a filter again. kumo cloud can tell you the status of any filter in your system at any time.
- Google Assistant and Amazon Alexa: Connect your kumo cloud to Google Assistant and Amazon Alexa and control your system using voice commands.
Ceiling Cassettes
| Model | Clg MBH | SEER | Htg MBH | HSPF | I-See | Fan Speeds |
|---|---|---|---|---|---|---|
| MLZ-KP09NA | 9.0 | 12.0 | No | 5 | ||
| MLZ-KP12NA | 12.0 | 15.0 | No | 5 | ||
| MLZ-KP18NA | 18.0 | 21.0 | No | 5 | ||
| SLZ-KF09NA | 9.0 | 22.4 | 11.0 | 12.2 | Yes | 3 |
| SLZ-KF12NA | 12.0 | 22.0 | 13.0 | 11.4 | Yes | 3 |
| SLZ-KF15NA | 15.0 | 19.8 | 18.0 | 11.2 | Yes | 3 |
| SLZ-KF18NA | 17.7 | 20.7 | 19.7 | 11.6 | Yes | 3 |
- MLZ-KP Models: Low-profile design is paired with quiet operations with multiple operating modes, multiple fan speeds, and the ability to fit between standard 16" joists.
- SLZ-KF Models: 3D i-see advanced thermal sensor that scans the room for hot and cold spots as well as occupancy. Using this information, the cassette unit can be programmed to direct airflow to certain areas of the zone in specific scenarios.
- Hot Start Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
- Condensate Removal System simplifies installation and prevents condensate overflow, which can damage or destroy your property.
Horizontal Ducted
New home construction is the perfect opportunity to take advantage of the efficiency and unique design of Mitsubishi Electric Zoned Comfort Solutions®. Our horizontal-ducted units use less ductwork than traditional systems and can be hidden either above the ceiling or below the floor.
| Model | Clg MBH | SEER | Htg MBH | HSPF | Fan Speeds | Static Press. Max |
|---|---|---|---|---|---|---|
| PEAD-A09AA7 | 9.0 | 19.4 | 11.4 | 11.5 | 3 | 0.6" |
| PEAD-A12AA7 | 12.0 | 18.6 | 16.3 | 10.9 | 3 | 0.6" |
| PEAD-A15AA7 | 15.0 | 18.6 | 21.0 | 12.1 | 3 | 0.6" |
| PEAD-A18AA7 | 18.0 | 18.8 | 24.7 | 11.5 | 3 | 0.6" |
| PEAD-A24AA7 | 24.0 | 19.6 | 26.0 | 10.8 | 3 | 0.6" |
| PEAD-A30AA7 | 30.0 | 19.1 | 32.0 | 10.8 | 3 | 0.6" |
| PEAD-A36AA7 | 36.0 | 19.1 | 38.0 | 9.9 | 3 | 0.6" |
| PEAD-A42AA7 | 42.0 | 45.0 | 16.1 | 10.0 | 3 | 0.6" |
Ducted Air Handler
Our multi-position air handler provides the powerful, quiet and efficient cooling and heating solution your home or business deserves. Perfect for new builds or replacing your old furnace. Quality construction and reliable performance keeps everyone comfortable.
| Model | Clg MBH | SEER | Htg MBH | HSPF | Fan Speeds | Static Press. Max |
|---|---|---|---|---|---|---|
| SVZ-KP12NA | 12.0 | 17.0 | 13.5 | 10.0 | 3 | 0.8" |
| SVZ-KP18NA | 18.0 | 17.6 | 22.8 | 10.4 | 3 | 0.8" |
| SVZ-KP24NA | 24.0 | 18.0 | 25.0 | 10.4 | 3 | 0.8" |
| SVZ-KP30NA | 27.0 | 18.0 | 30.0 | 13.6 | 3 | 0.8" |
| SVZ-KP36NA | 33.0 | 16.0 | 33.5 | 11.7 | 3 | 0.8" |
| PVA-A30AA7 | 30.0 | 19.0 | 32.0 | 10.0 | 3 | |
| PVA-A36AA7 | 36.0 | 19.3 | 38.0 | 9.5 | 3 | |
| PVA-A42AA7 | 42.0 | 18.0 | 46.0 | 9.3 | 3 |
- Direct Replacement Now you can replace your existing furnace serving large areas of space with an efficient Mitsubishi Electric system.
- Environmental Friendly Insulation: One inch R4.2, fiberglass-free insulation reduces condensation and boosts efficiency.
- Galvanized metal with a powder coated finish provides a solid and stable cabinet. Internal fan, coil, piping and circuitry are engineered and designed to work in harmony to provide years of reliable operation.
